Description Whats included in this NLOS point to point bridge: 2x Outdoor 802.11N 900MHz Bridge Radios 2x Flat Panel Antenna (Dual Polarized) 4x Coaxial Pigtail Cables 2x Power over Ethernet Injector (PoE) | 10/100 2x Power Supply 2x 50ft. Shielded cat5e Ethernet Cable 2x Pole Mount Hardware for 1-1.5″ OD mast Bridge Radios with external patch antennas are pre-configured for “out of the box” installation and operation. External Signal LED’s will assist with alignment and troubleshooting procedures before and after installation. This pre-packaged bridge kit includes a pair of 50ft. shielded Ethernet cables. (maximum length is 250ft.) The 900Mhz Point to Point Wireless Ethernet Bridge is recommended as a last resort for point to point networks when 2.4GHz or 5GHz is not available due to interference or obstructions between your locations. Up to 150Mbps Aggregate data rate can be achieved when line of sight is clear, and unobstructed, with distance less then 1/2 mile. Maximum distance with line of sight only. Trees and other obstructions reduce distance, speed, and increase latency. The high power of 28dBm on these radios with adjustable output for closer installations will help tune the link so it works for your particular application. The external 12dBi panel antennas connect via the included coaxial cables. This wireless bridge kit Includes WPA2 Security for maximum data encryption, and Power over Ethernet. This GNS-1139HP is sold as a Complete Link.
